Product Description

 

The processing principle of heat strengthened glass is similar to that of tempered class. Its heating temperature is around 650 Centigrade, a little lower than that for tempered glass. Besides, its cooling speed is low just like that of tempered glass. The only difference between such glass and tempered glass is that: its strength is lower than that of tempered glass, about twice that of common glass. However, like annealed glass, its pieces (when broken) are large in size. Thus, it can not be used as safety glass. The bending of heat strengthened glass is smaller than that of tempered glass and the thermo stability of heat strengthened glass is much better than that of annealed glass. 

 Applicable Scope

      As heat strengthened glass does not explode by itself, it is widely used in glass curtain walls, greenhouses, partitions and decoration industry.

 Specification of Flat Heat Strengthened Glass

 Product thickness: 3mm-25mm

 Minimum size: 200mm x 300mm

 Maximum size: 2800mm x 9000mm

 Specification of Curved Heat Strengthened Glass

 Product thickness: 4mm-25mm

Minimum radius: 800mm

 Maximum Height: 3800mm

 Product Certification
 National compulsory 3C certification
Australia AS/NZS 2208 certification
U.K. BS6206 certification

 U.S. ANSI Z97.1 certification
 SGCC certification & CAN/CGSB-12.1-M90

 Related processing: Acid etched, mirrored, silkscreen printed etc.

 

 

Product Image